Archive | Utah Home Builders

Eyre Houseplan – Utah Home Builders

Utah Home Builders – Priority Homes

Eyre Home – 2600 Finished Square feet on 2 levels.  The first picture is an image of the great room on the main floor.  It shows the custom fireplace, book shelves and mantle.

DSC_0011

This image shows the front of the home.  This home has 2600 unfinished square feet on a un-finished basement.

DSC_0008

 

DSC_0007

 

View from great room into the Kitchen and dining area.  It also shows a portion of the staircase.

 

DSC_0009

priority home cloud

Houses in Nephi and Juab County

Images Of Our Recent Built Homes

Recent Built Homes in Utah

Here are many images of the past homes we have built.  We will try to share as many of these as we can and also identify which our our house plans go with each picture.

3 Car Garage Windsor Home.  This house plan was built on a corner lot and accesses the garage from a side entrance.

034_edited-1

 

Brighton Home – 3 beds, 2 baths on main floor.

032_edited-1

 

Windsor Home – 2 Car Garage / Front entrance

 

029_edited-1

 

Eyre Home – 2600 Sq ft on upper levels, full basement below.  3 Car Garage with a lot of fun extras.

 

015_edited-1

 

Florence Home – 2 Car garage 1600 sq ft on main with full finished basement.

046_edited-1

 

Make sure you check back to see the new plans that we have finished.  We will be starting am Argyle in Goshen; a Brighton in Santaquin and a 3 car garage Windsor front entrance in Nephi.

Enhanced by Zemanta

Types of Kitchen Countertops

Types of Kitchen Countertops

 

English: Our humble house kitchen with updated...

Image via Wikipedia

Once you decide to begin your kitchen remodel, there are many choices and upgrades to consider. One is what type of countertop to choose. There are many different kinds:

 

Natural stone

The natural stone or dimension stone slab (e.g. granite) is shaped using cutting and finishing equipment in the shop of the fabricator. The edges are commonly put on by hand-held routers, grinders, or CNC equipment. If the stone has a highly variegated pattern, the stone may be laid out in final position in the shop for the customer’s inspection, or the stone slabs may be selected by experienced inspectors. Then the countertop assembly is installed on the job site by professionals. Commonly, initial countertop fabrication takes place at or near the quarry of origin, with blocks being sawn to thickness and then machined into standard widths (600mm and upwards), before being surface polished and edged. This method removes the need to ship waste material, and reduces the time needed to prepare client orders. A wide range of details may be pre-machined by the fabricator, allowing for installation of different sinks and cooker designs. A common drawback to natural stone is the need for sealing to prevent harboring of bacteria and/or fluids that may cause staining.

 

Wood

Wooden countertops can come in a variety of designs ranging from butcher block to joined planks to single wide stave. Wood is considered to be the most eco-friendly option when it comes to choosing a kitchen countertop as wood is a renewable resource. Wood countertops must be thoroughly cleaned and disinfected after contact with foods such as raw meat. Although the use of wooden work surfaces is prohibited in commercial food production areas in the EU, and the US Department of Agriculture advises against the use of wooden chopping boards, research by the Food Research Institute at the University of Wisconsin has shown that wooden work surfaces are no more dangerous, and in some cases safer than plastic alternatives. They have shown that while bacteria do get absorbed by the wood, they do not multiply and eventually die. While brand new plastic work surfaces are indeed easy to disinfect, once they have become heavily knife scarred they are nearly impossible to completely disinfect. This is not a problem with wooden work surfaces where the number of knife cuts made little difference.

 

Post-formed plastic laminate

“Postformed” (or literally “formed after being laminated” to the substrate) high pressure laminate countertop, often referred to as “plastic laminate countertop” is a material made more of wood product than plastic. The composition is of kraft paper, decorative papers, and melamine resins, bonded through high heat and pressure. This product is sometimes referred to as “Formica” or “Arborite,” but these are trade names of a manufactured high pressure laminate, of which there are many manufacturers.

 

The postform countertop is typically a high volume factory-produced product, which accounts for the economy of the product. The material composition consists of a single thin sheet of laminate (typically .030″ – .040″ in thickness) that gets bonded to a 45# density particle board substrate (or other similar base material such as MDF – medium density fiberboard, or plywood), with a PVA adhesive (poly vinyl acetate – a water-based adhesive). Traditionally postform countertops were manufactured with a solvent-based contact cement (a highly flammable, volatile organic compound – VOC). However, in today’s marketplace PVA adhesives have taken over for reasons of environmental responsibility (no VOC’s), safety (non-combustible), economy, and strength of the glue line.

 

A typical system consists of the following:

 

1) An automated infeed system for sequencing the particle board into production.

2) The CorFab Machine, an automated feed-through machine that cuts to size, cuts and bonds build down sticks with a hot melt adhesive to the under side of the substrate, and shapes the edge detail, all in a single motion.

3) An automated laminating system that applies the adhesive to both the substrate and laminate.

4) An indexing unit that aligns the laminate to the substrate with the proper overhang.

5) A Pinch Roller that makes the bond between the laminate and substrate.

6) The Postforming Machine that not only heats and forms the laminate around the substrate, but also cuts away the backsplash (when the top is to be used against a wall) from the main deck, all in a feed-through motion machine.

7) The AutoCove Machine, which heats and forms the backsplash upward 90 degrees, locking it into place with what is referred to as a cove stick, utilizing hot melt adhesive technology to hold it all together.

8) The final stage of the system usually consists of a trim saw that cuts the countertops to rough lengths, typically 8′, 10′ and 12′, ready for distribution.

 

Once manufactured the tops need only to be cut to length, mitered, fitted for assembly, and end capped (only if it is a visible finished end). A very specific machine for cutting the postform countertop is manufactured by only a few companies, it is commonly called a Cutting Station, Top Saw, or simply Miter Saw. This machine accurately cuts the countertop to field dimensions, making it easy for the installer to make the final scribe cuts on-site to complete the work. Sink cut outs can be made either in the field or at the installers shop.

 

Overall, the postform countertop is the most economical countertop on the market, and has the broadest selection of surface material to choose from. Surfaces can be either a solid color, or a pattern, and textures range from a satin funiture finish to a heavily textured stone or pebbled appearanece, to a high gloss resolution. Because of this diversity the postform countertop can satisfy a wide variety of design applications, and due to its economy, can be easily replaced to provide a fresh appearance in any room.

 

Self edge or wood edge laminates

Self or wood edge plastic laminate countertops are also very popular for those who chose to have few or no surface seams. In this style, the top shops use substrate for the countertop out of MDF, or particle board and then glue sheets of laminate to the substrate using Contact Cement. The laminate is then trimmed using a router. This method can’t reproduce the curved contours of post-formed countertopping but can be made to easily conform to a much-wider range of floor plans with fewer seams.

 

Crafted glass

Custom architectural crafted glass, tempered glass, textured glass pieces, and the ancient art of Verre églomisé, or reverse gilded glass, are applied to contemporary uses including countertops, backsplashes, and tabletops. Glass work may be customized to suit by craftsmen in the studio, then installed on site either in small components (such as a kitchen countertop composed of three rectangles of verre églomisé) or as immense, single units (for example, a glass countertop and sink basin formed of one continuous piece of textured glass). The glass is non-porous, relatively stain-proof, extremely hygienic, and “extremely heat resistant (up to 700 degrees).”Much work is being done to “recycle” glass using sources such as post consumer glass or post industrial float glass. The material can be crushed or cut into strips that is heated until the softening point of glass, binding the loose material back into a solid form.

 

Tile

Tile, including ceramic tile and stone tile, is installed in much the same way as flat lay laminate except that the gaps between the tiles are grouted after the tile has been glued down.

 

Solid surface plastic materials

Solid surface plastic acrylic or polyester materials are usually prefabricated at the installer’s shop and then assembled on site. The plastic material is readily glued and the glue joints are then sanded, leaving almost no visible trace of the joint. The edge treatment for solid-surface countertops can be very elaborate. The material itself is usually only about 12 mm (1/2 inch) thick so an edge is usually created by stacking up two or three layers of the material. The built-up edge then can be shaped to a rounded edge or an ogee. Fancier edge treatments are, of course, more expensive.

 

Natural quartz surfacing

Natural quartz surfacing is made from 100% natural quartz cut from blocks into slabs. The slabs are custom cut to create countertops. Quartz is naturally non-porous and scratch resistant. As with solid surface countertopping, the materials are prefabricated and installed by professionals. Thicknesses may be 1.2 cm (1/2 inch), 2 cm (3/4 inch), 3 cm (1¼ inch) or 4 cm (1½ inch).

 

Engineered quartz surfacing

Engineered stone quartz surfacing is made from approximately 95% natural quartz and 5% polymer resins. Testing has shown that they retain much of the toughness of quartz but display increased ductility due to the resin, improving impact resistance. Countertops are custom made and are more scratch resistant as well as less porous than natural quartz surfaces. Thicknesses may be 6mm, 1.2 cm (1/2 inch), 2 cm (3/4 inch), 3 cm (1¼ inch) or 4 cm (1½ inch). Brands include CMMA Solid Surface by World BMC, Hanstone, NaturaStone, Silestone, Q, Caesarstone, Technistone, Cambria, and Zodiaq.

 

Concrete

Concrete may be utilized as a surfacing material in one of several forms: cast-in-place (in which the fabricator creates forms atop the previously installed cabinetry, places, and then finishes the material in situ), custom precast ( in which the fabricator creates site templates, duplicates the pattern in a production facility offsite, and installs the finished product atop the cabinetry), and the machining of pre-manufactured gauged slabs (similar to natural stone fabrication).[8]

 

Concrete, especially precast, lends itself to a high degree of customization due to the phase-change nature of its creation, filling a specific form with a fluid material which hardens (through mineral hydration) to a durable cast stone. Color choices, edge styles, three-dimensional sculpting, and integral features such as sinks, drainboards, and decorative embedments are design options which may be incorporated. Due to its site-specific and generally handmade nature, concrete countertops are often produced by small shops and individual artisans although there are several large-scale manufacturers of gauged slabs.

 

Other materials

Stainless steel, stone, terrazzo, and other materials are usually prefabricated and assembled on site as well. The difficulty of prefabrication rises with the more exotic materials. As with solid-surface synthetic materials, the edge treatments can vary widely, but the material is usually thicker so there is often no need to build up the edge with multiple layers of the material. Many predesigned, prefabricated units (including sinks, drainboards, and other accessories) are available in stainless steel. These may be used “stand-alone” or integrated into larger custom assemblies. Some stainless steel systems stand on integrated legs and do not require the support of cabinetry.[1]

 

Priority Homes can offer an array of customized countertops. Call 435-623-2382 for more information.


[1] http://en.wikipedia.org/wiki/Countertop#Kitchen_countertops

Enhanced by Zemanta

Benefits Of Tile In A Utah New Home

Benefits of Tile

 

Calcutta Marble Polished Tile. Calcutta Marble...

Image via Wikipedia

Tile is defined as a thin, flat, or convex slab of hard material that is used to cover walls, floors, and roofs. They have been developed over many centuries as products of earthenware pottery.

 

The earliest tiles were produced in the middle east some 7,000-8,000 years ago. During those times, only the wealthy could afford to have their homes tiled. It wasn’t until the invention of handier materials in creating and shaping tile that it became affordable even for the not so wealthy family.

 

The Romans were the ones who really popularized the use of tile, even obsessing in it by using them all over their houses, temples, and other buildings and creating with it beautiful mosaics and patterns.

 

Styles of Tile Flooring

There is a wide array of choices available for you if you choose to install tile flooring in your house. Ceramics, granite, flagstone, slate, laminate, vinyl, marble, wood, sandstone, and cork are some of the materials that can constitute your tile flooring. Ceramic tile flooring is the most popular choice to install in the house. Because of the many options available, you could even use different tile materials for use in your home if you so desire. The hardness of tile is determined through an MOH (measure of hardness) scale which indicates the surface hardness of tiles. Tile ratings range from 0-5, with zero indicating that the tile is ‘soft’ and can only be used for decorative purposes only. A grade of 5 on the MOH scale means that the tile is suitable for high traffic areas and industrial use.

 

Some manufacturers already put adhesives at the back of each tile so installing is easy while some tiles require that you be the one to place the adhesives and grout before you attach them to the floor. Overall, installing tile flooring is still rather easy and with it, you can also make as many patterns as you like: brick stone, herringbone, basket weave, cobblestone, corridor style, etc; your imagination is the only limit. If in the future you will need to remove your tile flooring, there is also no cause to worry as removing it is a breeze with the use of a heat gun or stripper.

 

Caring and Cleaning Tile Flooring

It doesn’t mean that since tile flooring is strong and durable, you can just do anything you like with it. Tile flooring still has its own do’s and don’ts that you should remember in order to preserve its beauty:

 

  • Use cloths and mops to clean your tile flooring. Never use abrasive chemicals, steel wool, or other scrubbing material on your tile flooring as it can damage the finish.
  • Wipe out stains as soon as possible. Don’t let them stay on your tile for too long as stains can discolor your tiles.
  • Tile flooring can still chip and crack even if it has a high MOH rating if too much force is exerted on it. Put furniture protectors on your furniture and be careful when moving your furniture.
  • Turn off the vacuum beater bar when vacuuming. Vacuum beater bars can dull and scratch your finish.
  • Regularly sweep and dust your tile flooring. Not doing so may damage your grout and finish. A quick daily sweep and weekly mopping should do.
  • Place door mats on selected surfaces of your house. This way, you reduce the amount of dirt that gets transferred by your feet.
  • When cleaning or drying up spills, make sure that you use a damp mop and not a wet one. Wetness can invite mildew formation and ugly grout lines. In addition, some minerals in tap water can cause discoloration of your tiles.[1]

 

Priority Homes offers a variety of tile options. Please call 435-623-2382 for more information.


[1] http://www.contempofloorcoverings.com/blog/tile-flooring.html

Enhanced by Zemanta

At Priority Homes – We let You Choose

Utah Homebuilders

Image by SLV Native via Flickr

At Priority Homes – We let You Choose

Here is the color lost we use when we prepare your home.  We let you choose some the most basic items for your home.  We help guide you along and provide samples to ensure your home is just the way you want it.  Another reason to choose Priority Homes.

Call Today at (435) 623-2382 to learn more about our home choices in Santaquin and other Utah locations.  For your choice of Utah Homebuilders, choose Priority Homes.

 

Color Options:

 

Exterior:

Brick  / Rock Color – ___________________________________________

Stucco Color – ________________________________________________

Soffett and Fascia – _____________________________________________

Shingles – _____________________________________________________

 

 Interior :

Windows: _____________________________________________________

(White, Tan, Brown)

Paint (Main) ___________________________________________________

Paint (Base and Trim) ____________________________________________

Door Hardware _________________________________________________

(Brass, Nickel, Antique Nickel)

Carpet _________________________________________________________

Tile ____________________________________________________________

Cabinets ________________________________________________________

Counter tops _____________________________________________________

Utah Homebuilders

 

Enhanced by Zemanta

Building A Home In Utah

Building In Utah Is The Right Thing To do.  Why?  Utah is in a great position right now in the economic world.  Below is an article I located on other good things that are happening to Utah.

DSC_0007No. 5: Utah

With a state government focused on economic growth, Utah frequently shows up at or near the top of lists of states where it’s good to do business. Here’s why they’re near the top of our list:

Utah has a rapidly growing working-age population, with a 1.5 percent increase in the number of 18- to 64-year-olds between 2012 and 2013, the second-highest rate in the nation.

Utah also saw robust job growth, adding 45,000 jobs between June 2013 and June 2014, a 3.5 percent increase.

State GDP rose 3.8 percent in 2013, tied for sixth in the country.

Our Client’s Point of View

Our experience with Priority Homes, from drawing up plans to handing over the keys, was smooth and easy. Communication was open and they were always available to answer questions. They were always careful to double- and triple-check each step of the building process, notify me when unexpected situations arose — a guarantee when building a home — and we appreciated their advise, as well as their no-pressure attitude to leave any decisions in our hands.

Priority Homes stayed on budget and on schedule, even pushing deadlines up to accommodate special circumstances on our part. We are now enjoying the quality craftsmanship, and small issues that have come up have been taken care of quickly and efficiently.

We absolutely recommend Priority Homes for a pleasant building experience.

Jessica Eyre – Nephi, Utah

Nephi Eyre Project

DSC_0007

Thanks to Our Sub Contractors – We are Growing!

logosamplesfinal1rev copyAs many of you are now well aware, we are currently building 8 homes.  This number of homes is the largest number of homes being built at one time in our business history. It is our intent to even enlarge this number.  In the years past all of you contractors have been good to us and we express our appreciation for that.  We hope to continue to have great success in the future.

 
As our numbers increase, we will be proactive in providing you the information quicker and easier so that you can provide us the numbers we need to push them along.
 
All of our properties are bank funded and are pre-sales.  This will also give you the comfort needed to move forward with us.  
 
We hope that you share our name with future home-owners, so we can build a successful team.
 
Thanks again for your business and relationship.